72841L25PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 4KX9 |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72841L25PF8 Overview
FIFO memory chip is included in the TQFP package.Surface Mount is memory IC's recommended mounting method.A supply voltage of 5V allows for high efficiency.FIFO means contains 64 terminations.The operation pins are 64 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .A supply voltage of 5V is recommended for FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget in FIFOs is self-contained.This part has a memory type of OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.There are a total of 64 pins on this board.During regular operation, 40MHz is the FIFO memory's maximum value.It is normal for a component to be equipped with 5V power supplies.
72841L25PF8 Features
FIFOs category
Frequency at most
72841L25PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72841L25PF8 FIFOs Memory applications.
- Character generators
- Fabrication Site
- Consumer Systems
- Queues for communication systems
- Event Recorder
- A/D output buffers
- Disk Controllers
- Test Equipment
- Digital buffering
- Cardiac Monitoring Device
