72841L25PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2013 |
| Part Status | Active |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 40MHz |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Direction | Bidirectional |
| Density | 72 kb |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72841L25PFI Overview
The TQFP package contains FIFO memory chip.Surface Mount is recommended as the mounting method.There are 64 pins for operation.In order to operate it, it requires 60mA volts of current.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.The memory logic's maximum supply voltage is 5.5V volts.It is capable of maintaining good accuracy with a frequency of 40MHz .There is 40MHz FIFO memory IC's maximum value for regular operation.
72841L25PFI Features
Frequency at most
72841L25PFI Applications
There are a lot of Integrated Device Technology (IDT) 72841L25PFI FIFOs Memory applications.
- Look-up Tables
- Communications Systems
- Alarm System
- Firmware loaders
- Measurement Equipment
- Computer Systems
- Controlled baseline
- Signal processing
- Multi-stage synchronizer
- PC peripheral
