72845LB10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72845LB10PF8 Overview
FIFO memory chip can be found in the TQFP package.You'll find it packaged in the shape of a Tape & Reel .Mounting it Surface Mount is recommended.When the supply voltage is 5V there is the possibility of high efficiency.FIFO consists of 128 terminations, which indicates that FIFO means is empty.FIFO design has 128 operation pins.FIFO design requires 100mA amps of current to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.It is self-contained in FIFOs .There is a memory type OTHER FIFO in the IC of this part.FIFO may operate at a very low supply voltage, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.A total of 128 pins are present on the FIFO memory IC.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.It is recommended that the FIFO memory's maximum value be set to 100MHz .Normally, 5V power supplies are owned by the component.
72845LB10PF8 Features
FIFOs category
Frequency at most
72845LB10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72845LB10PF8 FIFOs Memory applications.
- Laser Receiver System
- Optical memories
- Tape controllers
- Telecommunication
- Data communications
- Multimedia
- Consumer Systems
- Extended product-change notification
- Character generators
- Game Controller
