72845LB15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72845LB15PFI8 Overview
FIFO memory chip is contained in the TQFP package.A Surface Mount mounting method is recommended.High efficiency is possible with a supply voltage of 5V .128 terminations are contained in FIFO means.These are the 128 pins for operation.FIFO design requires 100mA amps of current to operate.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is self-contained in FIFOs .The IC of the part is of the type OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.There are a total of 128 pins on this FIFO memory IC.It is capable of maintaining good accuracy with a frequency of 66.7MHz .It is recommended that the FIFO memory's maximum value be set to 66.7MHz .A component normally has 5V power supplies attached to it.
72845LB15PFI8 Features
FIFOs category
Frequency at most
72845LB15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72845LB15PFI8 FIFOs Memory applications.
- Digital buffering
- Smart Meter
- Video
- Battery Charger
- Code converters
- Firmware loaders
- Communications
- HDD
- Medical Monitoring Device
- Computer networks
