72845LB25PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 4KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72845LB25PF Overview
The TQFP package contains FIFO memory chip.A Surface Mount mounting method is recommended.An input voltage of 5V results in high efficiency.FIFO consists of 128 terminations, which indicates that FIFO means is empty.There are 128 pins for operation.There is a maximum current requirement of 100mA for its operation.A supply voltage of 5V is recommended for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.In FIFOs , there is a self-contained gadget.ICs of type OTHER FIFO are used in the FIFO memory chip.Low supply voltages, such as 4.5V V, may be required for operation.The memory logic's maximum supply voltage is 5.5V volts.A total of 128 pins are present on the FIFO memory IC.A frequency of 40MHz is sufficient to maintain good accuracy.Normally, the FIFO memory's maximum value is 40MHz .It is normal for the component to own 5V power supplies.
72845LB25PF Features
FIFOs category
Frequency at most
72845LB25PF Applications
There are a lot of Integrated Device Technology (IDT) 72845LB25PF FIFOs Memory applications.
- Desktop Computers
- Computer networks
- Alarm System
- Signal processing
- PC peripheral
- Video
- Consumer
- Data communications
- MP3 Interface for Automobile
- Measurement Equipment
