7284L12PA
| Parameters | |
|---|---|
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 4KX9 |
| Density | 72 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
7284L12PA Overview
TSSOP is a package that contains FIFO memory chip.Mounting it Surface Mount is recommended.With a supply voltage of 5V volts, high efficiency is possible.FIFO means contains a total of 56 terminations.In the case of the operation pins, they are 56 pins.For its operation, 150mA is the maximum current required.A supply voltage of 5V is recommended for FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.In FIFOs , this gadget is self-contained.A OTHER FIFO memory type IC is used in the part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.As a result, it contains a total of 56 pins.The component normally owns 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .A clock on the FIFO memory IC runs at a frequency of 50MHz .
7284L12PA Features
FIFOs category
Clock frequency of 50MHz
7284L12PA Applications
There are a lot of Integrated Device Technology (IDT) 7284L12PA FIFOs Memory applications.
- Temporary storage elements
- Notebook
- Network bridges
- Extended product-change notification
- Address mapping
- Test Equipment
- Data-acquisition systems
- Video Processing
- Alarm System
- Consumer
