7284L15PAI8
| Parameters | |
|---|---|
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 4KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
7284L15PAI8 Overview
The TSSOP package contains FIFO memory chip.There is a case Tape & Reel in which it is packaged.The recommended mounting way is Surface Mount .A supply voltage of 5V is capable of producing high efficiency.The number of terminations in FIFO means is 56 .56 pin is used for operation.FIFO design requires 150mA amps of current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .It operates at -40°C degrees Celsius to ensure reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.There is a self-contained gadget within FIFOs .There is a memory type OTHER FIFO in the IC of this part.FIFO may operate at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.A total of 56 pins are present on the FIFO memory IC.In normal circumstances, the component has 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.There is 40MHz frequency set for the clock of the FIFO memory IC.
7284L15PAI8 Features
FIFOs category
Clock frequency of 40MHz
7284L15PAI8 Applications
There are a lot of Integrated Device Technology (IDT) 7284L15PAI8 FIFOs Memory applications.
- Firmware loaders
- Character generators
- Rate buffers
- Disk Controllers
- Industrial Systems
- Video
- SPI Bus Flash Memory Device
- A/D output buffers
- Laser Receiver System
- PC peripheral
