7284L20PA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 4.5kB |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 33MHz |
| Access Time | 20 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 4KX9 |
| Density | 72 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7284L20PA Overview
The TSSOP package contains FIFO memory chip.The FIFO chips have a memory of 4.5kB that can be used to store applications and data.Mounting it in Surface Mount is recommended.A supply voltage of 5V allows for high efficiency.FIFO consists of 56 terminations, which indicates that FIFO means is empty.There are 56 pins on the operation pins.In order to operate FIFO design, a maximum current of 150mA is required.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.In FIFOs , this gadget is self-contained.The IC of the part is of the type OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.Approximately 56 pins are attached to it.It is normal for a component to be equipped with 5V power supplies.This FIFO memory IC operates at a frequency of 33MHz .By using 2 circuits, FIFO memory chip has greater flexibility.
7284L20PA Features
4.5kB memory size
FIFOs category
Clock frequency of 33MHz
7284L20PA Applications
There are a lot of Integrated Device Technology (IDT) 7284L20PA FIFOs Memory applications.
- Transistors
- SPD for DDR3 Memory Modules
- High-speed disk
- Temporary storage elements
- Controlled baseline
- Consumer Systems
- Down-Hole Energy Drilling
- Computers
- Network switching/routing
- Magnetic memories
