72851L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72851L10PF Overview
You will find FIFO memory chip in the TQFP package.Memory IC's recommended mounted way is Surface Mount .A supply voltage of 5V is capable of producing high efficiency.A total of 64 terminations are contained within FIFO means.In the case of the operation pins, they are 64 pins.For its operation, 80mA is the maximum current required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.70°C °C is the memory logic's maximum operating temperature that allows stable operation.This gadget is self-contained in?FIFOs .The IC of the part is OTHER FIFO memory type.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.The FIFO memory IC has a total of 64 pins.It maintains good accuracy at a 100MHz frequency.The memory logic's maximum value is 100MHz for regular operation.A component normally has 5V power supplies attached to it.
72851L10PF Features
FIFOs category
Frequency at most
72851L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72851L10PF FIFOs Memory applications.
- SPI Bus Flash Memory Device
- Seismic Data Collection at Extreme Temperatures
- Battery Charger
- Character generators
- Buses
- Network switching/routing
- Industrial Systems
- SPD for DDR3 Memory Modules
- Desktop Computers
- Computers
