72851L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72851L15PF8 Overview
TQFP is a package that contains FIFO memory chip.This FIFO memory chip is packaged as a Tape & Reel .Mounting it Surface Mount is recommended.A supply voltage of 5V is capable of producing high efficiency.I found that it has 64 terminations in FIFO means.64 pins are used for operation.There is a maximum current requirement of 80mA for its operation.A voltage of 5V should be used for FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget is self-contained and can be found in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.This FIFO memory IC is equipped with 64 pins in total.With a frequency of 66.7MHz , it maintains good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.The component normally owns 5V power supplies.
72851L15PF8 Features
FIFOs category
Frequency at most
72851L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72851L15PF8 FIFOs Memory applications.
- Video time base correction
- Portable Information Devices
- Data communications
- Networking
- Routers
- Code converters
- High-speed disk
- Cardiac Monitoring Device
- Consumer Systems
- A/D output buffers
