72851L25PFI8
| Parameters | |
|---|---|
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
72851L25PFI8 Overview
You can find FIFO memory chip in the TQFP package.It comes in a Tape & Reel package.Mounting it Surface Mount is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.I found that it has 64 terminations in FIFO means.64 pins are used for operation.For its operation, 80mA is the maximum current required.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.The memory logic's maximum operating temperature is 85°C °C, which allows for stable operation.It is contained within FIFOs .The IC of the part is OTHER FIFO memory type.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.There are a total of 64 pins on this FIFO memory IC.In the presence of a 40MHz frequency, it can maintain good accuracy.There is 40MHz FIFO memory IC's maximum value for regular operation.It is normal for the component to own 5V power supplies.
72851L25PFI8 Features
FIFOs category
Frequency at most
72851L25PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72851L25PFI8 FIFOs Memory applications.
- Look-up Tables
- Industrial Systems
- Consumer Systems
- Network bridges
- Game Consoles
- Consumer
- Test Equipment
- Routers
- Battery Charger
- Analog-to-digital converters
