7285L15PA8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7285L15PA8 Overview
The TSSOP package contains FIFO memory chip.Surface Mount is memory IC's recommended mounting method.If the supply voltage is set to 5V , high efficiency can be achieved.A total of 56 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 56 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 150mA .In order to maximize efficiency, the supply voltage should be set to 5V .Keeping the temperature at 0°C degrees Celsius ensures its reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.In FIFOs , this gadget is self-contained.This part has a memory type of OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.This FIFO memory IC is equipped with 56 pins in total.The component normally owns 5V power supplies.The gadget can also generate a value of RETRANSMIT .This FIFO memory IC operates at a frequency of 40MHz .
7285L15PA8 Features
FIFOs category
Clock frequency of 40MHz
7285L15PA8 Applications
There are a lot of Integrated Device Technology (IDT) 7285L15PA8 FIFOs Memory applications.
- Extended product-change notification
- High-speed graphics pixel buffer
- Data-acquisition systems
- Alarm System
- Industrial Systems
- Code converters
- General Data Collection Applications at Extreme High-Temperatures
- Controlled baseline
- Measurement Equipment
- Wireless
