7285L15PAGI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 1kB |
| Element Configuration | Dual |
| Max Supply Current | 150mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 8KX9 |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7285L15PAGI Overview
FIFO memory chip is contained in the TSSOP package.A FIFO chip's memory is 1kB , which may be used to store applications and data.Mounting it Surface Mount is recommended.When the supply voltage is 5V there is the possibility of high efficiency.I found that it has 56 terminations in FIFO means.There are 56 pins on the operation pins.In order to operate it, it requires 150mA volts of current.For FIFO's maximum efficiency, the supply voltage should be set to 5V .For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.85°C °C is the memory logic's maximum operating temperature that allows stable operation.FIFOs contains this gadget in its entirety.The IC of the part is of the type OTHER FIFO .Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.The FIFO memory IC is equipped with a total of 56 pins.During normal operation, the FIFO memory's maximum value is 40MHz .Components normally possess 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .Using 2 circuits allows for enhanced flexibility.
7285L15PAGI Features
1kB memory size
FIFOs category
Frequency at most
7285L15PAGI Applications
There are a lot of Integrated Device Technology (IDT) 7285L15PAGI FIFOs Memory applications.
- Fabrication Site
- Data-acquisition systems
- High-speed disk
- Game Consoles
- Consumer
- Wireless
- Extended product-change notification
- Computer Systems
- General Data Collection Applications at Low-Temperatures
- Computer networks
