7285L15PAI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7285L15PAI Overview
TSSOP is a package that contains FIFO memory chip.Mounting it Surface Mount is recommended.High efficiency is possible with a supply voltage of 5V .The number of terminations in FIFO means is 56 .There are 56 pins on the operation pins.In order to operate it, it requires 150mA volts of current.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.It operates at -40°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.FIFOs contains this gadget in its entirety.It has a OTHER FIFO memory type IC.FIFO may operate at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.As a result, it contains a total of 56 pins.The component normally owns 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.This FIFO memory IC operates at a frequency of 40MHz .
7285L15PAI Features
FIFOs category
Clock frequency of 40MHz
7285L15PAI Applications
There are a lot of Integrated Device Technology (IDT) 7285L15PAI FIFOs Memory applications.
- Computer networks
- Communications Systems
- MP3 Interface for Automobile
- TVs
- Queues for communication systems
- SPI Bus Flash Memory Devices
- Rate buffers
- Disk Controllers
- Cardiac Monitoring Device
- Measurement Equipment
