7285L15PAI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Weight | 740.007602mg |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height | 1mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7285L15PAI8 Overview
TSSOP is the package in which FIFO memory chip is contained.It is pointing in the direction of Surface Mount .An input voltage of 5V results in high efficiency.In FIFO means, there are 56 terminations.As far as the operation pins are concerned, they are 56 pins.The maximum current required for its operation is 150mA .Set the supply voltage to 5V to ensure FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.An operating temperature of 85°C °C is necessary for stable operation.A self-contained gadget is contained within FIFOs .It has a type OTHER FIFO memory IC.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.There are a total of 56 pins on this FIFO memory IC.It is normal for a component to be equipped with 5V power supplies.Using this gadget, RETRANSMIT can also be generated.The FIFO memory IC is controlled by a clock with a frequency of 40MHz .
7285L15PAI8 Features
FIFOs category
Clock frequency of 40MHz
7285L15PAI8 Applications
There are a lot of Integrated Device Technology (IDT) 7285L15PAI8 FIFOs Memory applications.
- GPS Offender Tracking
- Thermal Management for DDR3 Memory Modules
- PC peripheral
- Communications
- Networking
- Code converters
- Emulators
- Industrial Systems
- Video time base correction
- Optical memories
