7285L20PA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 9kB |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Access Time | 20 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 8KX9 |
| Density | 144 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7285L20PA Overview
You will find FIFO memory chip in the TSSOP package.Apps and data can be stored in the 9kB memory of the FIFO chip.A Surface Mount mounting method is recommended.When the supply voltage is 5V there is the possibility of high efficiency.In FIFO means, there are 56 terminations.The operation pins are 56 pins.In order to operate it, it requires 150mA volts of current.For FIFO's maximum efficiency, the supply voltage should be set to 5V .To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.An operating temperature of 70°C °C is necessary for stable operation.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.A total of 56 pins are present on the FIFO memory IC.By using 2 circuits, FIFO memory chip has greater flexibility.
7285L20PA Features
9kB memory size
7285L20PA Applications
There are a lot of Integrated Device Technology (IDT) 7285L20PA FIFOs Memory applications.
- Firmware loaders
- Consumer
- Application that requires re-writable nonvolatile parameter memory
- Test site
- Game Consoles
- Telecommunication
- Network switching/routing
- Portable Information Devices
- Optical memories
- Multimedia
