7285L20PA8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 33MHz |
| Access Time | 20 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7285L20PA8 Overview
TSSOP is a package that contains FIFO memory chip.Surface Mount is recommended as the mounting method.A supply voltage of 5V allows for high efficiency.I found that it has 56 terminations in FIFO means.FIFO design has 56 operation pins.FIFO design requires a maximum current of 150mA to operate.In order to maximize efficiency, the supply voltage should be set to 5V .It operates at 0°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.In FIFOs , this gadget is self-contained.There is a memory type OTHER FIFO in the IC of this part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.This FIFO memory IC is equipped with 56 pins in total.It is normal for a component to be equipped with 5V power supplies.The FIFO memory IC runs at a frequency of 33MHz .
7285L20PA8 Features
FIFOs category
Clock frequency of 33MHz
7285L20PA8 Applications
There are a lot of Integrated Device Technology (IDT) 7285L20PA8 FIFOs Memory applications.
- Video
- Firmware loaders
- Networking
- Cardiac Monitoring Device
- Battery Charger
- Medical Monitoring Device
- TVs
- Code converters
- Fabrication Site
- Smart Meter
