72T18105L6-7BB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 240 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 240 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 240 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 70mA |
| Max Supply Current | 70mA |
| Clock Frequency | 66MHz |
| Frequency (Max) | 150MHz |
| Access Time | 3.8 ns |
| Organization | 128KX18 |
| Density | 2.3 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6.7 ns |
| Height Seated (Max) | 1.97mm |
| Length | 19mm |
| Width | 19mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72T18105L6-7BB Overview
This package is included in BGA .Surface Mount is recommended as the mounting method.With a supply voltage of 2.5V volts, high efficiency is possible.The number of terminations in FIFO means is 240 .240 pins are the operation pins.In order to operate it, it requires 70mA volts of current.A voltage of 2.5V should be used for FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.The gadget is self-contained and can be found in FIFOs .The IC of the part is OTHER FIFO memory type.In some cases, FIFO operates at a very low supply voltage, such as 2.375V V.An input voltage of 2.625V V is the maximum that FIFO memory can handle.A total of 240 pins are present on the FIFO memory IC.It is recommended that the FIFO memory's maximum value be set to 150MHz .This FIFO memory IC operates at a frequency of 66MHz .
72T18105L6-7BB Features
FIFOs category
Frequency at most
Clock frequency of 66MHz
72T18105L6-7BB Applications
There are a lot of Integrated Device Technology (IDT) 72T18105L6-7BB FIFOs Memory applications.
- Fabrication Site
- IP Radio
- Data communications
- Data
- Network bridges
- High-speed disk
- Address mapping
- PC peripheral
- GPS Offender Tracking
- Data-acquisition systems
