72T18115L10BB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 240 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 240 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 240 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 70mA |
| Max Supply Current | 70mA |
| Clock Frequency | 50MHz |
| Frequency (Max) | 100MHz |
| Access Time | 4.5 ns |
| Organization | 256KX18 |
| Density | 4.5 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.97mm |
| Length | 19mm |
| Width | 19mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72T18115L10BB Overview
You can find FIFO memory chip in the BGA package.You'll find it packaged in the shape of a Bulk .Mounting it in Surface Mount is recommended.An input voltage of 2.5V results in high efficiency.I found that it has 240 terminations in FIFO means.FIFO design has 240 operation pins.In order to operate it, it requires 70mA volts of current.A supply voltage of 2.5V is recommended for FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.There is a self-contained gadget within FIFOs .It has a OTHER FIFO memory type IC.In some cases, FIFO operates at a very low supply voltage, such as 2.375V V.There is a maximum supply voltage of 2.625V volts that FIFO memory can handle.It consists of a total of 240 pins.There is 100MHz FIFO memory IC's maximum value for regular operation.A clock on the FIFO memory IC runs at a frequency of 50MHz .
72T18115L10BB Features
FIFOs category
Frequency at most
Clock frequency of 50MHz
72T18115L10BB Applications
There are a lot of Integrated Device Technology (IDT) 72T18115L10BB FIFOs Memory applications.
- Battery Charger
- Tape controllers
- One assembly
- Communications
- IP Camera Buffer
- Game Consoles
- PC peripheral
- Magnetic memories
- Firmware loaders
- Alarm System
