72T18115L4-4BB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 240 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 240 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 240 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 70mA |
| Max Supply Current | 70mA |
| Clock Frequency | 100MHz |
| Frequency (Max) | 225MHz |
| Access Time | 3.4 ns |
| Organization | 256KX18 |
| Density | 4.5 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 4.44 ns |
| Height Seated (Max) | 1.97mm |
| Length | 19mm |
| Width | 19mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72T18115L4-4BB Overview
You will find FIFO memory chip in the BGA package.Bulk case is used for packaging.Surface Mount is memory IC's recommended mounting method.High efficiency is possible with a supply voltage of 2.5V .As a result of this, FIFO means contains 240 terminations.Operation pins are 240 .In order to operate it, it requires 70mA volts of current.A 2.5V supply voltage will ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is contained within FIFOs .It has a OTHER FIFO memory type IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 2.375V V.There is a maximum supply voltage of 2.625V volts that FIFO memory can handle.Approximately 240 pins are attached to it.Normally, the FIFO memory's maximum value is 225MHz .There is 100MHz frequency set for the clock of the FIFO memory IC.
72T18115L4-4BB Features
FIFOs category
Frequency at most
Clock frequency of 100MHz
72T18115L4-4BB Applications
There are a lot of Integrated Device Technology (IDT) 72T18115L4-4BB FIFOs Memory applications.
- TVs
- Transistors
- Test site
- Disk Controllers
- Product traceability
- Controlled baseline
- Network switching/routing
- Computer networks
- Notebook
- Buses
