72T18115L6-7BB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 240 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 240 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 240 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 70mA |
| Max Supply Current | 70mA |
| Clock Frequency | 66MHz |
| Frequency (Max) | 150MHz |
| Access Time | 3.8 ns |
| Organization | 256KX18 |
| Density | 4.5 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6.7 ns |
| Height Seated (Max) | 1.97mm |
| Length | 19mm |
| Width | 19mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72T18115L6-7BB Overview
You can find FIFO memory chip in the BGA package.There is a case Bulk in which it is packaged.A Surface Mount mounting method is recommended.When the supply voltage is 2.5V , high efficiency is possible.I found that it has 240 terminations in FIFO means.240 pins are used for operation.Its maximum operating current is 70mA .A 2.5V supply voltage will ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.It is possible to operate the FIFO memory chip at very low supply voltages, such as 2.375V volts.FIFO memory can handle a maximum supply voltage of 2.625V volts.Currently, it has 240 pins.It is recommended that the FIFO memory's maximum value be set to 150MHz .FIFO memory ICs run at a frequency of 66MHz .
72T18115L6-7BB Features
FIFOs category
Frequency at most
Clock frequency of 66MHz
72T18115L6-7BB Applications
There are a lot of Integrated Device Technology (IDT) 72T18115L6-7BB FIFOs Memory applications.
- Signal processing
- Emulators
- MP3 Interface for Automobile
- Video time base correction
- Temporary storage elements
- Wireless
- IP Camera Buffer
- Game Controller
- Disk Controllers
- Tape controllers
