72T18125L10BB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 240 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 240 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 240 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1.1MB |
| Element Configuration | Dual |
| Nominal Supply Current | 70mA |
| Max Supply Current | 70mA |
| Clock Frequency | 50MHz |
| Frequency (Max) | 100MHz |
| Access Time | 4.5 ns |
| Data Bus Width | 18b |
| Organization | 512KX18 |
| Density | 9 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height | 1.76mm |
| Length | 19mm |
| Width | 19mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72T18125L10BB Overview
You can find FIFO memory chip in the BGA package.It's packaged in the shape of a Bulk .It is possible to store data and applications on the FIFO chips as they have 1.1MB in their memory.Mounting it Surface Mount is recommended.With a supply voltage of 2.5V volts, high efficiency is possible.FIFO means contains 240 terminations.The operation pins are 240 pins.In order to operate FIFO design, a maximum current of 70mA is required.FIFO is recommended that the supply voltage be set to 2.5V in order to maximize efficiency.It operates at 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget is self-contained and can be found in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO memory chips may be operated at very low supply voltages, such as 2.375V volts.FIFO memory is capable of handling a maximum supply voltage of 2.625V volts.The FIFO memory IC is equipped with a total of 240 pins.For regular operation, the memory logic's maximum value is 100MHz .The FIFO memory IC runs at a frequency of 50MHz .
72T18125L10BB Features
1.1MB memory size
FIFOs category
Frequency at most
Clock frequency of 50MHz
72T18125L10BB Applications
There are a lot of Integrated Device Technology (IDT) 72T18125L10BB FIFOs Memory applications.
- Measurement Equipment
- Network switching/routing
- GPS Offender Tracking
- Video
- High-speed disk
- Transistors
- Notebook
- Disk Controllers
- Address mapping
- Data communications
