72T1855L5BBI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 144 |
| Published | 2005 |
| Part Status | Active |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Operating Supply Voltage | 2.5V |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 200MHz |
| Access Time | 3.6 ns |
| Density | 72 kb |
| Sync/Async | Asynchronous |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Length | 13mm |
| Width | 13mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72T1855L5BBI Overview
FIFO memory chip is contained in the BGA package.Mounting it in the Surface Mount way is recommended.FIFO design has 144 operation pins.In order for FIFO design to operate, a maximum current of 60mA is required.FIFO is recommended that the supply voltage be set to 2.5V in order to maximize efficiency.The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.If the supply voltage is very low, such as 2.375V V, FIFO may be able to operate.A maximum voltage of 2.625V volts can be applied to FIFO memory.During normal operation, the FIFO memory's maximum value is 200MHz .
72T1855L5BBI Features
Frequency at most
72T1855L5BBI Applications
There are a lot of Integrated Device Technology (IDT) 72T1855L5BBI FIFOs Memory applications.
- Consumer
- Fabrication Site
- Application that requires re-writable nonvolatile parameter memory
- Signal processing
- Digital buffering
- Networking
- IP Radio
- Consumer Systems
- Extended product-change notification
- Computer Systems
