72T1865L5BBI
| Parameters | |
|---|---|
| Access Time | 3.6 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.05A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 5 ns |
| Height Seated (Max) | 1.97mm |
| Length | 13mm |
| Width | 13mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 144 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 83MHz |
| Frequency (Max) | 200MHz |
72T1865L5BBI Overview
The BGA package contains FIFO memory chip.A Surface Mount mounting method is recommended.An input voltage of 2.5V results in high efficiency.I found that it has 144 terminations in FIFO means.There are 144 pins for operation.In order to operate FIFO design, a maximum current of 60mA is required.When the supply voltage is set to 2.5V , the FIFO's maximum efficiency is achieved.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.This gadget is self-contained in?FIFOs .There is a memory type OTHER FIFO in the IC of this part.There is a possibility that FIFO may operate at a very low supply voltage, such as 2.375V V.A maximum voltage of 2.625V volts can be applied to FIFO memory.There are a total of 144 pins on this FIFO memory IC.Regular operation has a FIFO memory's maximum value of 200MHz .FIFO memory ICs run at a frequency of 83MHz .
72T1865L5BBI Features
FIFOs category
Frequency at most
Clock frequency of 83MHz
72T1865L5BBI Applications
There are a lot of Integrated Device Technology (IDT) 72T1865L5BBI FIFOs Memory applications.
- Temporary storage elements
- Game Consoles
- One assembly
- Event Recorder
- Address mapping
- Game Controller
- TVs
- Computer networks
- Microprogramming
- HDD
