72T36115L4-4BB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 240 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 240 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 240 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 90mA |
| Max Supply Current | 90mA |
| Frequency (Max) | 225MHz |
| Access Time | 3.4 ns |
| Organization | 128KX36 |
| Density | 4.5 Mb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 4.4 ns |
| Height Seated (Max) | 1.97mm |
| Length | 19mm |
| Width | 19mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72T36115L4-4BB Overview
The BGA package contains FIFO memory chip.The recommended mounting method for this FIFO products is Surface Mount .If the supply voltage is set to 2.5V , high efficiency can be achieved.240 terminations are contained in FIFO means.240 pin is used for operation.FIFO design requires a maximum current of 90mA to operate.The supply voltage should be set to 2.5V in order to achieve FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.The gadget is self-contained and can be found in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO may operate at a very low supply voltage, such as 2.375V V.The FIFO memory chip is capable of handling maximum supply voltages of 2.625V volts.Approximately 240 pins are attached to it.For regular operation, the memory logic's maximum value is 225MHz .
72T36115L4-4BB Features
FIFOs category
Frequency at most
72T36115L4-4BB Applications
There are a lot of Integrated Device Technology (IDT) 72T36115L4-4BB FIFOs Memory applications.
- Thermal Management for DDR3 Memory Modules
- Laser Receiver System
- SPI Bus Flash Memory Devices
- Computer Systems
- GPS Offender Tracking
- Address mapping
- Extended product-change notification
- Game Controller
- Communications
- Smart Meter
