72T36125L6-7BB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 240 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 240 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 240 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 90mA |
| Max Supply Current | 90mA |
| Frequency (Max) | 150MHz |
| Access Time | 3.8 ns |
| Organization | 256KX36 |
| Density | 9 Mb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6.7 ns |
| Height Seated (Max) | 1.97mm |
| Length | 19mm |
| Width | 19mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72T36125L6-7BB Overview
FIFO memory chip is contained in the BGA package.It is recommended that memory IC be mounted in the Surface Mount direction.A supply voltage of 2.5V allows for high efficiency.A total of 240 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 240 pins.In order to operate it, it requires 90mA volts of current.A 2.5V supply voltage will ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.70°C °C is the memory logic's maximum operating temperature that allows stable operation.It is contained within FIFOs .The IC of the part is of the type OTHER FIFO .Low supply voltages, such as 2.375V V, may be required for operation.The memory logic's maximum supply voltage is 2.625V volts.There are a total of 240 pins on this FIFO memory IC.There is 150MHz FIFO memory IC's maximum value for regular operation.
72T36125L6-7BB Features
FIFOs category
Frequency at most
72T36125L6-7BB Applications
There are a lot of Integrated Device Technology (IDT) 72T36125L6-7BB FIFOs Memory applications.
- Test site
- Alarm System
- SPI Bus Flash Memory Devices
- Analog-to-digital converters
- Optical memories
- Character generators
- TVs
- A/D output buffers
- Tape controllers
- IP Radio
