72T72115L5BBI
| Parameters | |
|---|---|
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 324 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 324 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1.1MB |
| Element Configuration | Dual |
| Nominal Supply Current | 130mA |
| Max Supply Current | 130mA |
| Frequency (Max) | 200MHz |
| Access Time | 3.6 ns |
| Data Bus Width | 72b |
| Density | 9 Mb |
| Standby Current-Max | 0.05A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 72b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 5 ns |
| Height | 1.76mm |
| Length | 19mm |
| Width | 19mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 324 |
| Weight | 1.713814g |
| Packaging | Bulk |
| Published | 2009 |
72T72115L5BBI Overview
You will find FIFO memory chip in the BGA package.In this case, it is packaged in case number Bulk .The FIFO chips have a memory of 1.1MB that can be used to store applications and data.A Surface Mount mounting method is recommended.When the supply voltage is 2.5V , high efficiency is possible.As a result of this, FIFO means contains 324 terminations.Operation pins are 324 .In order for FIFO design to operate, FIFO design requires a maximum current of 130mA .In order to maximize efficiency, the supply voltage should be set to 2.5V .The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.FIFOs contains this gadget in its entirety.The IC of the part is of the type OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 2.375V volts.FIFO memory can handle a maximum supply voltage of 2.625V V.The FIFO memory IC has a total of 324 pins.It is capable of maintaining good accuracy with a frequency of 200MHz .Normally, the FIFO memory's maximum value is 200MHz .Through the use of 1 circuits, FIFO memory chip is able to achieve enhanced flexibility.
72T72115L5BBI Features
1.1MB memory size
FIFOs category
Frequency at most
72T72115L5BBI Applications
There are a lot of Integrated Device Technology (IDT) 72T72115L5BBI FIFOs Memory applications.
- High-speed graphics pixel buffer
- Computer Systems
- Product traceability
- Measurement Equipment
- Extended product life cycle
- Address mapping
- Data-acquisition systems
- Look-up Tables
- Magnetic memories
- Analog-to-digital converters
