72T7285L10BB
| Parameters | |
|---|---|
| Width | 19mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 324 |
| Weight | 1.713814g |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 324 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 324 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 130mA |
| Max Supply Current | 130mA |
| Frequency (Max) | 100MHz |
| Access Time | 4.5 ns |
| Organization | 16KX72 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.05A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 72b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.97mm |
| Length | 19mm |
72T7285L10BB Overview
FIFO memory chip can be found in the BGA package.It is pointing in the direction of Surface Mount .A supply voltage of 2.5V allows for high efficiency.324 terminations are contained in FIFO means.The operation pins are 324 pins.The maximum current required for its operation is 130mA .When setting the supply voltage to 2.5V , you will achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained within FIFOs .The IC of the part is OTHER FIFO memory type.There is a possibility that FIFO can operate at very low supply voltages, such as 2.375V V.The memory logic's maximum supply voltage is 2.625V volts.Approximately 324 pins are attached to it.With a frequency of 100MHz , it maintains good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .
72T7285L10BB Features
FIFOs category
Frequency at most
72T7285L10BB Applications
There are a lot of Integrated Device Technology (IDT) 72T7285L10BB FIFOs Memory applications.
- Game Consoles
- Controlled baseline
- Data
- Routers
- Queues for communication systems
- IP Radio
- SPI Bus Flash Memory Devices
- Game Controller
- Data communications
- Emulators
