72T7285L4-4BBG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 324 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 324 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 225MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 324 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 130mA |
| Max Supply Current | 130mA |
| Frequency (Max) | 225MHz |
| Access Time | 3.4 ns |
| Organization | 16KX72 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 72b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 4.44 ns |
| Height Seated (Max) | 1.97mm |
| Length | 19mm |
| Width | 19mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72T7285L4-4BBG Overview
You can find FIFO memory chip in package BGA .In this case, it is packaged in case number Bulk .Mounting it Surface Mount is recommended.When the supply voltage is 2.5V , high efficiency is possible.A total of 324 terminations can be found in FIFO means.324 pin is used for operation.There is a maximum current requirement of 130mA for its operation.A voltage of 2.5V should be used for FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.In FIFOs , there is a self-contained gadget.It has a OTHER FIFO memory type IC.The FIFO memory chip may be operated at very low supply voltages, such as2.375V volts.This FIFO memory chip can handle maximum supply voltages of 2.625V volts.There are a total of 324 pins on this board.It is capable of maintaining good accuracy with a frequency of 225MHz .It is recommended that the FIFO memory's maximum value be set to 225MHz .
72T7285L4-4BBG Features
FIFOs category
Frequency at most
72T7285L4-4BBG Applications
There are a lot of Integrated Device Technology (IDT) 72T7285L4-4BBG FIFOs Memory applications.
- Smart Meter
- Measurement Equipment
- Product traceability
- Data
- Data-acquisition systems
- Controlled baseline
- PC peripheral
- Thermal Management for DDR3 Memory Modules
- High-speed disk
- Video Processing
