72T7295L10BB
| Parameters | |
|---|---|
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 130mA |
| Max Supply Current | 130mA |
| Frequency (Max) | 100MHz |
| Access Time | 4.5 ns |
| Organization | 32KX72 |
| Density | 2.3 Mb |
| Standby Current-Max | 0.05A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 72b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.97mm |
| Length | 19mm |
| Width | 19mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 324 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 324 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 324 |
| Qualification Status | Not Qualified |
72T7295L10BB Overview
BGA is a package that contains FIFO memory chip.It is pointing in the direction of Surface Mount .When the supply voltage is 2.5V there is the possibility of high efficiency.FIFO means contains a total of 324 terminations.324 pin is used for operation.There is a maximum current requirement of 130mA for its operation.The supply voltage should be set to 2.5V in order to achieve FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is contained within FIFOs .It has a type OTHER FIFO memory IC.FIFO may operate at very low supply voltages, such as 2.375V volts.A maximum voltage of 2.625V volts can be applied to FIFO memory.There are a total of 324 pins on this board.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.
72T7295L10BB Features
FIFOs category
Frequency at most
72T7295L10BB Applications
There are a lot of Integrated Device Technology (IDT) 72T7295L10BB FIFOs Memory applications.
- Extended product-change notification
- One assembly
- Notebook
- Network switching/routing
- SPI Bus Flash Memory Device
- Buses
- Switches
- Event Recorder
- Test site
- Game Consoles
