72T7295L4-4BB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 324 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 324 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 225MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 324 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 130mA |
| Max Supply Current | 130mA |
| Frequency (Max) | 225MHz |
| Access Time | 3.4 ns |
| Organization | 32KX72 |
| Density | 2.3 Mb |
| Standby Current-Max | 0.05A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 72b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 4.44 ns |
| Height Seated (Max) | 1.97mm |
| Length | 19mm |
| Width | 19mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72T7295L4-4BB Overview
FIFO memory chip is included in the BGA package.You'll find it packaged in the shape of a Bulk .The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 2.5V there is the possibility of high efficiency.The number of terminations in FIFO means is 324 .The operation pins are 324 pins.FIFO requires a minimum of 130mA current to operate.A 2.5V supply voltage will ensure FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget is self-contained and can be found in FIFOs .A OTHER FIFO memory type IC is used in the part.FIFO may operate at very low supply voltages, such as 2.375V volts.FIFO memory can handle a maximum supply voltage of 2.625V volts.A total of 324 pins are present on the FIFO memory IC.A frequency of 225MHz is capable of maintaining good accuracy.During regular operation, 225MHz is the FIFO memory's maximum value.
72T7295L4-4BB Features
FIFOs category
Frequency at most
72T7295L4-4BB Applications
There are a lot of Integrated Device Technology (IDT) 72T7295L4-4BB FIFOs Memory applications.
- Network switching/routing
- Data-acquisition systems
- Alarm System
- Code converters
- Character generators
- Computers
- Medical Monitoring Device
- GPS Offender Tracking
- Tape controllers
- Laser Receiver System
