72V01L15J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 50MHz |
| Access Time | 15 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V01L15J8 Overview
The PLCC package contains FIFO memory chip.Mounting it Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .As a result of this, FIFO means contains 32 terminations.As far as the operation pins are concerned, they are 32 pins.FIFO design requires 60mA amps of current to operate.A voltage of 3.3V should be used for FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.Its maximum operating temperature of 70°C °C ensures stable operation.A self-contained gadget is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Low supply voltages, such as 3V V, may be required for operation.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.This FIFO memory IC is equipped with 32 pins in total.This FIFO memory IC has a clock frequency of 50MHz .
72V01L15J8 Features
FIFOs category
Clock frequency of 50MHz
72V01L15J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V01L15J8 FIFOs Memory applications.
- GPS Offender Tracking
- Tape controllers
- Consumer
- Character generators
- Computers
- Computer Systems
- Switches
- Extended product life cycle
- Medical Monitoring Device
- Event Recorder
