72V01L25J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0003A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V01L25J Overview
The PLCC package contains FIFO memory chip.The recommended mounting method for this FIFO products is Surface Mount .An input voltage of 3.3V results in high efficiency.I found that it has 32 terminations in FIFO means.There are 32 pins for operation.There is a maximum current requirement of 60mA for its operation.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.FIFO may operate at a very low supply voltage, such as 3V V.The memory logic's maximum supply voltage is 3.6V volts.A total of 32 pins are present on the FIFO memory IC.With the help of this FIFO memory, RETRANSMIT can also be generated.The clock of the FIFO memory IC runs at 28.5MHz frequency.
72V01L25J Features
FIFOs category
Clock frequency of 28.5MHz
72V01L25J Applications
There are a lot of Integrated Device Technology (IDT) 72V01L25J FIFOs Memory applications.
- Programmable Logic Controller
- Analog-to-digital converters
- Industrial Systems
- Data-acquisition systems
- Computers
- MP3 Interface for Automobile
- Character generators
- Multi-stage synchronizer
- Look-up Tables
- Extended product-change notification
