72V01L25J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Access Time | 25 ns |
| Direction | Unidirectional |
| Density | 4.5 kb |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Programmable Flags Support | No |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V01L25J8 Overview
The PLCC package contains FIFO memory chip.Surface Mount is recommended as the mounting method.There are 32 pins on the operation pins.For its operation, 60mA is the maximum current required.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.FIFO may operate at very low supply voltages, such as 3V volts.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.
72V01L25J8 Features
72V01L25J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V01L25J8 FIFOs Memory applications.
- Disk Controllers
- Microprogramming
- IP Camera Buffer
- Data communications
- Programmable Logic Controller
- Test Equipment
- Consumer Systems
- Data-acquisition systems
- Video time base correction
- Character generators
