72V01L35J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0003A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V01L35J Overview
PLCC is the package in which FIFO memory chip is contained.The recommended mounting way is Surface Mount .An input voltage of 3.3V results in high efficiency.The number of terminations in FIFO means is 32 .These are the 32 pins for operation.FIFO design requires 60mA amps of current to operate.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.FIFOs contains this gadget in its entirety.This part is equipped with an IC of type OTHER FIFO memory.The FIFO memory chip may be operated at very low supply voltages, such as3V volts.A maximum voltage of 3.6V volts can be applied to FIFO memory.A total of 32 pins are present on the FIFO memory IC.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.FIFO memory ICs run at a frequency of 22.2MHz .
72V01L35J Features
FIFOs category
Clock frequency of 22.2MHz
72V01L35J Applications
There are a lot of Integrated Device Technology (IDT) 72V01L35J FIFOs Memory applications.
- Multimedia
- Rate buffers
- High-speed graphics pixel buffer
- Consumer Systems
- Thermal Management for DDR3 Memory Modules
- Smart Meter
- Medical Monitoring Device
- HDD
- PC peripheral
- Programmable Logic Controller
