72V01L35J8
| Parameters | |
|---|---|
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0003A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
72V01L35J8 Overview
FIFO memory chip can be found in the PLCC package.This FIFO memory chip is packaged as a Tape & Reel .Mounting it in the Surface Mount way is recommended.If the supply voltage is set to 3.3V , high efficiency can be achieved.In FIFO means, there are 32 terminations.There are 32 pins on the operation pins.Its maximum operating current is 60mA .A voltage of 3.3V should be used for FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.The gadget is self-contained and can be found in FIFOs .It has a type OTHER FIFO memory IC.FIFO may operate at very low supply voltages, such as 3V volts.An input voltage of 3.6V V is the maximum that FIFO memory can handle.As a result, it contains a total of 32 pins.It is also possible to generate RETRANSMIT with the use of this FIFO memory.A clock running at frequency 22.2MHz is used by the FIFO memory IC.
72V01L35J8 Features
FIFOs category
Clock frequency of 22.2MHz
72V01L35J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V01L35J8 FIFOs Memory applications.
- SPD for DDR3 Memory Modules
- Temporary storage elements
- Game Controller
- Event Recorder
- Video Processing
- Desktop Computers
- Communications
- Multi-stage synchronizer
- One assembly
- Firmware loaders
