72V02L15J8
| Parameters | |
|---|---|
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 50MHz |
| Access Time | 15 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
72V02L15J8 Overview
The PLCC package contains FIFO memory chip.The recommended mounting method for this FIFO products is Surface Mount .High efficiency is possible with a supply voltage of 3.3V .FIFO means contains 32 terminations.32 pins are the operation pins.For its operation, 60mA is the maximum current required.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.It is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.A total of 32 pins are present on the FIFO memory IC.This FIFO memory IC has a clock frequency of 50MHz .
72V02L15J8 Features
FIFOs category
Clock frequency of 50MHz
72V02L15J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V02L15J8 FIFOs Memory applications.
- Firmware loaders
- Video time base correction
- General Data Collection Applications at Low-Temperatures
- Battery Charger
- Cardiac Monitoring Device
- High-speed graphics pixel buffer
- Test site
- Telecommunication
- Measurement Equipment
- Controlled baseline
