72V02L25J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.0003A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V02L25J8 Overview
The PLCC package contains FIFO memory chip.The recommended mounting way is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 3.3V .In FIFO means, there are 32 terminations.32 pins are the operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .A voltage of 3.3V should be used for FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained in FIFOs .The IC of the part is of the type OTHER FIFO .If the supply voltage is very low, such as 3V V, FIFO may be able to operate.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.A total of 32 pins are present on the FIFO memory IC.With the help of this FIFO memory, RETRANSMIT can also be generated.A clock running at frequency 28.5MHz is used by the FIFO memory IC.
72V02L25J8 Features
FIFOs category
Clock frequency of 28.5MHz
72V02L25J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V02L25J8 FIFOs Memory applications.
- Computer Systems
- Industrial Systems
- Portable Information Devices
- Network bridges
- Measurement Equipment
- Tape controllers
- HDD
- MP3 Interface for Automobile
- Firmware loaders
- One assembly
