72V02L25JGI8
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| Part Status | Active |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Access Time | 25 ns |
| Density | 9 kb |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Height | 2.79mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
72V02L25JGI8 Overview
You can find FIFO memory chip in package PLCC .It is pointing in the direction of Surface Mount .Operation pins are 32 .The maximum current required for its operation is 60mA .FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.
72V02L25JGI8 Features
72V02L25JGI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V02L25JGI8 FIFOs Memory applications.
- Measurement Equipment
- High-speed graphics pixel buffer
- Look-up Tables
- Industrial Systems
- Alarm System
- Firmware loaders
- TVs
- Wireless
- Networking
- HDD
