72V02L25JI8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.0003A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
72V02L25JI8 Overview
This package is included in PLCC .Tape & Reel case is used for packaging.A Surface Mount mounting method is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .In FIFO means, there are 32 terminations.As far as the operation pins are concerned, they are 32 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.The memory logic's maximum operating temperature is 85°C °C, which allows for stable operation.The gadget is self-contained and can be found in FIFOs .It has a type OTHER FIFO memory IC.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.The memory logic's maximum supply voltage is 3.6V volts.It consists of a total of 32 pins.The FIFO memory IC's clock runs at a frequency of 28.5MHz .
72V02L25JI8 Features
FIFOs category
Clock frequency of 28.5MHz
72V02L25JI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V02L25JI8 FIFOs Memory applications.
- IP Radio
- Data-acquisition systems
- Video Processing
- Thermal Management for DDR3 Memory Modules
- Test Equipment
- Magnetic memories
- Network bridges
- Laser Receiver System
- Extended product-change notification
- Signal processing
