72V03L15J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 50MHz |
| Access Time | 15 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V03L15J8 Overview
You can find FIFO memory chip in package PLCC .There is a case Tape & Reel in which it is packaged.The recommended mounting method for this FIFO products is Surface Mount .With a supply voltage of 3.3V volts, high efficiency is possible.The number of terminations in FIFO means is 32 .FIFO design has 32 operation pins.In order for FIFO design to operate, a maximum current of 60mA is required.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.In FIFOs , this gadget is self-contained.A OTHER FIFO type memory IC is present in the FIFO memory chip.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.Approximately 32 pins are attached to it.A clock on the FIFO memory IC runs at a frequency of 50MHz .
72V03L15J8 Features
FIFOs category
Clock frequency of 50MHz
72V03L15J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V03L15J8 FIFOs Memory applications.
- Switches
- Look-up Tables
- Extended product-change notification
- Wireless
- Signal processing
- Industrial Systems
- Video
- High-speed disk
- Network bridges
- Medical Monitoring Device
