72V03L25J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 60mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 2KX9 |
| Standby Current-Max | 0.0003A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V03L25J8 Overview
FIFO memory chip is included in the LCC package.Mounting it Surface Mount is recommended.Supply voltages of 3.3V are capable of achieving high efficiency.The number of terminations in FIFO means is 32 .32 pins are used for operation.In order to operate it, it requires 60mA volts of current.In order to maximize efficiency, the supply voltage should be set to 3.3V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.This gadget is self-contained in?FIFOs .A OTHER FIFO memory type IC is used in the part.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.A maximum voltage of 3.6V volts can be applied to FIFO memory.Approximately 32 pins are attached to it.This gadget can also generate RETRANSMIT .The FIFO memory IC's clock runs at a frequency of 28.5MHz .
72V03L25J8 Features
FIFOs category
Clock frequency of 28.5MHz
72V03L25J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V03L25J8 FIFOs Memory applications.
- Digital buffering
- Communications Systems
- Disk Controllers
- MP3 Interface for Automobile
- Queues for communication systems
- Signal processing
- Cameras
- Rate buffers
- Data communications
- Computer Systems
