72V03L25JI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.0003A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V03L25JI Overview
This package is included in PLCC .Surface Mount is recommended as the mounting method.When the supply voltage is 3.3V , high efficiency is possible.A total of 32 terminations are contained within FIFO means.These are the 32 pins for operation.There is a maximum current requirement of 60mA for its operation.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.This gadget is self-contained in?FIFOs .The IC of the part is OTHER FIFO memory type.There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.As a result, it contains a total of 32 pins.The FIFO memory IC's clock runs at a frequency of 28.5MHz .
72V03L25JI Features
FIFOs category
Clock frequency of 28.5MHz
72V03L25JI Applications
There are a lot of Integrated Device Technology (IDT) 72V03L25JI FIFOs Memory applications.
- Computers
- High-speed graphics pixel buffer
- Thermal Management for DDR3 Memory Modules
- Tape controllers
- IP Camera Buffer
- One assembly
- Portable Information Devices
- Laser Receiver System
- Down-Hole Energy Drilling
- Controlled baseline
