72V03L35J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.0003A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V03L35J Overview
FIFO memory chip is included in the PLCC package.Surface Mount is recommended as the mounting method.Supply voltages of 3.3V are capable of achieving high efficiency.FIFO means contains 32 terminations.Operation pins are 32 .In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .Keeping the temperature at 0°C degrees Celsius ensures its reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.This gadget is self-contained in?FIFOs .The IC of the part is of the type OTHER FIFO .Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.The FIFO memory IC is equipped with a total of 32 pins.Additionally, RETRANSMIT can be generated with this FIFO memory.There is 22.2MHz frequency set for the clock of the FIFO memory IC.
72V03L35J Features
FIFOs category
Clock frequency of 22.2MHz
72V03L35J Applications
There are a lot of Integrated Device Technology (IDT) 72V03L35J FIFOs Memory applications.
- Measurement Equipment
- Test Equipment
- Game Controller
- Rate buffers
- Industrial Systems
- Video
- General Data Collection Applications at Low-Temperatures
- Consumer
- Event Recorder
- Data-acquisition systems
