72V03L35J8
| Parameters | |
|---|---|
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.0003A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
72V03L35J8 Overview
You will find FIFO memory chip in the PLCC package.Surface Mount is memory IC's recommended mounting method.Supply voltages of 3.3V are capable of achieving high efficiency.In FIFO means, there are 32 terminations.There are 32 pins for operation.The maximum current required for its operation is 60mA .In order to maximize efficiency, the supply voltage should be set to 3.3V .At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.An operating temperature of 70°C °C is necessary for stable operation.In FIFOs , there is a self-contained gadget.In this part, the memory type is OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as3V volts.A maximum voltage of 3.6V volts can be applied to FIFO memory.There are a total of 32 pins on this board.Additionally, RETRANSMIT can be generated with this FIFO memory.The clock of the FIFO memory IC runs at 22.2MHz frequency.
72V03L35J8 Features
FIFOs category
Clock frequency of 22.2MHz
72V03L35J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V03L35J8 FIFOs Memory applications.
- Measurement Equipment
- Fabrication Site
- Emulators
- Signal processing
- General Data Collection Applications at Extreme High-Temperatures
- Extended product life cycle
- TVs
- Routers
- Data
- A/D output buffers
