72V04L15J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 50MHz |
| Access Time | 15 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V04L15J8 Overview
PLCC is the package in which FIFO memory chip is contained.Memory IC's recommended mounted way is Surface Mount .A supply voltage of 3.3V allows for high efficiency.A total of 32 terminations are contained within FIFO means.These are the 32 pins for operation.The maximum current required for its operation is 60mA .A 3.3V supply voltage will ensure FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.It is self-contained in FIFOs .In this part, the memory type is OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.There are a total of 32 pins on this FIFO memory IC.A clock running at frequency 50MHz is used by the FIFO memory IC.
72V04L15J8 Features
FIFOs category
Clock frequency of 50MHz
72V04L15J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V04L15J8 FIFOs Memory applications.
- Battery Charger
- Multi-stage synchronizer
- HDD
- Optical memories
- Thermal Management for DDR3 Memory Modules
- Event Recorder
- IP Radio
- Fabrication Site
- Temporary storage elements
- High-speed disk
