72V04L25J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.0003A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V04L25J8 Overview
PLCC is a package that contains FIFO memory chip.It is pointing in the direction of Surface Mount .A supply voltage of 3.3V allows for high efficiency.32 terminations are contained in FIFO means.32 pins are used for operation.There is a maximum current requirement of 60mA for its operation.A 3.3V supply voltage will ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.There is a self-contained gadget within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.The FIFO memory IC has a total of 32 pins.With the help of this FIFO memory, RETRANSMIT can also be generated.A clock on the FIFO memory IC runs at a frequency of 28.5MHz .
72V04L25J8 Features
FIFOs category
Clock frequency of 28.5MHz
72V04L25J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V04L25J8 FIFOs Memory applications.
- Firmware loaders
- MP3 Interface for Automobile
- Industrial Systems
- Programmable Logic Controller
- Digital buffering
- Down-Hole Energy Drilling
- Computer networks
- Multimedia
- Look-up Tables
- Networking
