72V04L25JI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.0003A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V04L25JI8 Overview
PLCC is the package in which FIFO memory chip is contained.You'll find it packaged in the shape of a Tape & Reel .It is recommended that memory IC be mounted in the Surface Mount direction.A supply voltage of 3.3V is capable of producing high efficiency.The number of terminations in FIFO means is 32 .These are the 32 pins for operation.In order to operate it, it requires 60mA volts of current.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.The gadget in FIFOs is self-contained.The IC of the part is OTHER FIFO memory type.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.There are a total of 32 pins on this FIFO memory IC.This FIFO memory IC has a clock frequency of 28.5MHz .
72V04L25JI8 Features
FIFOs category
Clock frequency of 28.5MHz
72V04L25JI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V04L25JI8 FIFOs Memory applications.
- Transistors
- Wireless
- Portable Information Devices
- Firmware loaders
- Product traceability
- Consumer Systems
- Notebook
- Medical Monitoring Device
- Rate buffers
- High-speed disk
