72V04L35J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Data Bus Width | 9b |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.0003A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V04L35J Overview
PLCC is a package that contains FIFO memory chip.A Surface Mount mounting method is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.32 terminations are contained in FIFO means.There are 32 pins for operation.In order for FIFO design to operate, a maximum current of 60mA is required.In order to maximize efficiency, the supply voltage should be set to 3.3V .In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.In FIFOs , there is a self-contained gadget.This part is equipped with an IC of type OTHER FIFO memory.Low supply voltages, such as 3V V, may be required for operation.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.A total of 32 pins are present on the FIFO memory IC.It is also possible to generate RETRANSMIT with the use of this FIFO memory.The FIFO memory IC's clock runs at a frequency of 22.2MHz .
72V04L35J Features
FIFOs category
Clock frequency of 22.2MHz
72V04L35J Applications
There are a lot of Integrated Device Technology (IDT) 72V04L35J FIFOs Memory applications.
- TVs
- Network bridges
- Computer networks
- Transistors
- Switches
- Alarm System
- Event Recorder
- Consumer Systems
- Test Equipment
- Cardiac Monitoring Device
