72V04L35J8
| Parameters | |
|---|---|
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.0003A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
72V04L35J8 Overview
FIFO memory chip can be found in the PLCC package.Mounting it in Surface Mount is recommended.A supply voltage of 3.3V is capable of producing high efficiency.FIFO consists of 32 terminations, which indicates that FIFO means is empty.32 pin is used for operation.In order for FIFO design to operate, a maximum current of 60mA is required.A voltage of 3.3V should be used for FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.There is a self-contained gadget within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.As a result, it contains a total of 32 pins.This gadget can also generate RETRANSMIT .The clock of the FIFO memory IC runs at 22.2MHz frequency.
72V04L35J8 Features
FIFOs category
Clock frequency of 22.2MHz
72V04L35J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V04L35J8 FIFOs Memory applications.
- Industrial Systems
- Smart Meter
- Application that requires re-writable nonvolatile parameter memory
- Disk Controllers
- GPS Offender Tracking
- Video Processing
- Extended product life cycle
- IP Camera Buffer
- Data
- Wireless
